Operating Mode

Intermittent Tone

Operating Voltage

12 Vdc

Operating Voltage

5 to 30 Vdc

Operating Frequency

2,900+/-500Hz

Sound Output

100+/-5Db, at 12 Vdc, at 30cm, at 25 ^oC

Operating Current

10Ma at 12Vdc       

Operating Temperature

-30 ^oC to +65 ^oC

Storage Temperature

-40 ^oC to +85 ^oC

Termination

Description

Two,0.25 (6.4mm) Quick Connect Blades,0.032φ（0.8φmm）Wide, Brass, Electro-Tin Plated With M3 0.25’’ (6.4mm) long Stainless Steel Screws.

Termination Strength

Maximum of 15 pounds (6.8 Kg) load pull test for 10 seconds

Construction Materials

Case

Plastic, PC

Diaphragm

Brass Disc

Weight (Typical)

42 g

Reliability

*Life Test

At rated voltage in room temperature, 1 cycle = 1 min. ON 4 min. OFF, continuously for 1,000 hours

*High Temperature

No function at +85+/-2 ^oC for 240 hours; Function at +65+/-2 ^oC for 240 hours

*Low Temperature

No function at -40+/-2 ^oC for 240 hours; Function at -30+/-2 ^oC for 240 hours

*Humidity

+60 +/-2 ^oC,90-95%RH, 120 hours

*Thermal Cycle

-40+/-2 ^oC 1 hr Ò +20 +/-2 ^oC 5 min. Ò +65+/-2 ^oC 1 hr Ò +20+/-2 ^oC 5 min. 5 cycles

*Vibration

1.5mm with 10 to 50Hz of vibration frequency to each of 3 perpendicular directions for 2 hours

*Shock

980m/s² (=100g) shock for each mutually perpendicular directions, half sine wave, 3 times each

*Drop Test

Dropped naturally from 700mm height onto the surface of 10mm wooden board. 2 directions – upper and side of the part are applied

Warranty

For a period of one (1) year from date of manufacture under normal operations

* All specifications must be satisfied after the test (Recovery: 2 to 4 hrs of recovery under the standard condition after the removal from test chamber).

**90% min. soldering pads shall be with solder.(except the edge of pad)