CPT22EM03-2.0-P3.5R

Chinasound Piezo Transducer 22mm diameter, type E (=11.8 mm height), MPPO housing, 03Vp-p rated voltage – 2.0KHz resonant frequency – Pin length 3.5mm, RoHS compliant

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

1.03.039

Category

Products

RoHS compliant:

⧫ Reliable Solid State Piezoelectric Technology

⧫ Flame Retardant Plastic

⧫ Wave solderable

⧫ Contains Lead zirconium titanium oxide (CAS 12626-81-2) more than 0.1%

Quantity

Stock:



Characteristice

Dimensions

Specification

Rated Voltage		3Vp-p square wave
Operating Voltage		1 ~ 25Vp-p
Operating Frequency		2,000+/-500Hz
Typical Sound Output		80 dB min. at 3Vp-p 10cm 2.0 KHz 25^oC ; 70 dB min. at 3Vp-p 30cm 2.0 KHz 25^oC
Rated Current		2mA max. at 3Vp-p 2.0KHz 25^oC
Capacitance		22,000+/-30% pF at 100Hz 1Vrms
Operating Temp.		-40^oC to +125^oC
Storage Temperature		-40^oC to +125^oC
Termination	Description	2 Spring Pins, Tin plated
	Termination Strength	Maximum of 9.8N load pull test, applied to each terminal in axial direction for 10 seconds
Construction Materials	Case	Plastic, MPPO with 20% glass fibre housing, PPS bottom
	Diaphragm	Brass Disc
Weight (Typical)		2.5 g
Reliability	*Life Test	At 3Vp-p in room temperature, continuously for 1000 hours
	*High Temperature	No function at +125+/-2^oC for 240 hours; Function at +125+/-2 ^oC for 240 hours
	*Low Temperature	No function at -40+/-2 ^oC for 240 hours; Function at -40+/-2 ^oC for 240 hours
	*Humidity	+40+/-2^oC, 95+/-5%RH, 240 hours
	*Thermal Cycle	-40+/-2^oC 0.5 hr Ò +25+/-2^oC 0.25 hr Ò +125+/-2^oC 0.5 hr Ò +25+/-2^oC 0.25 hr. Temperature Go up or Drop time is 0.5 hr. 3 hrs per 1 cycle. Total is 5 cycles
	*Vibration	1.5mm with 10 to 50Hz of vibration frequency to each of 3 perpendicular directions for 2 hours
	*Shock	980m/s²(=100g) shock for each mutually perpendicular directions, half sine wave, 3 times each
	*Drop Test	Dropped naturally from 750mm height onto the surface of 10mm wooden board. 2 directions – upper and side of the part are applied
	*Soldering Heat Resistance	Terminals are immersed up to 1.5mm from sounder’s body in solder bath of 350+/-5^oC for 3+/-0.5 seconds or 260+/-5^oC for 10+/-1 seconds
	**Solderability	Terminals are immersed in rosin for 5 seconds and then immersed in solder bath of 350+/-5^oC for 3+/-0.5 seconds.
Warranty		For a period of one (1) year from date of manufacture under normal operations
* All specifications must be satisfied after the test (Recovery:2 to 4 hrs of recovery under the standard condition after the removal from test chamber). **90% min. soldering pads shall be with solder.(except the edge of terminal)